MODULE 3 CHAPTER 2 QUIZ 2



Question Number. 11. The resistance of the current return path through the aircraft is always considered negligible, provided the.

Option A. structure is adequately bonded.

Option B. voltage drop across the circuit is checked. Option C. generator is properly grounded.

Correct Answer is. structure is adequately bonded.

Explanation. NIL ..................................

Question Number. 12. If an insulated conductor is placed near to a negatively charged rod, the nearest end of the conductor becomes.

Option A. No change will occur

. Option B. negatively charged.

Option C. positively charged.

Correct Answer is. positively charged.

Explanation. The free electrons in the conductor will be repelled away from the rod, leaving that end positively charged ..................................

Question Number. 13. The electromagnetic force between two charged bodies is.

Option A. inversely proportional to the distance between them.

Option B. inversely proportional to the square of the distance between them.

Option C. proportional to the distance between them.

Correct Answer is. inversely proportional to the square of the distance between them.

Explanation. NIL .................................

.Question Number. 14. If a negatively charged conductor is placed next to an insulated rod.

Option A. the rod becomes negatively charged.

Option B. the rod has no charge.

Option C. the rod becomes positively charged.

Correct Answer is. the rod becomes positively charged.

Explanation. The negative charges on the rod are repelled by the charged conductor (regardless of its insulation).

Comments

Post a Comment

Popular posts from this blog

What is AC Generator? Modern AC sources are, almost exclusively, induction generators, where the principle of work is based on electromagnetic induction. In this case, the electromagnetic current is obtained by rotating the conductors in the magnetic field. Today, almost all alternating current generators are three-phase. This means that in their movable part, which is called a rotor, they have three separate coils, placed between each other at an angle of 120◦, in which three EMC are phase-shifted precisely by 120◦, or in time sequence for a third period. Coils are usually indicated by the letters R, S and T, each of which defines a single phase. Depending on the binding of these coils, the transmission of electricity from the generator to the consumer is carried out with 4 or with 3 conductors. If at the beginnings of all the coils are bound at one point (the so-called zero point), then we are talking about star connection. In that case, the other ends of each coil, are connected wit
Read more

MODULE 3 CHAPTERR 3 QUIZ 1

03. Electrical Terminology .................................. Question Number. 1. If a photon radiating into an electronic device causes the production of an electron/hole pair, the device is known as a. Option A. light emitting diode. Option B. laser diode. Option C. photodiode. Correct Answer is. photodiode. Explanation. NIL .................................. Question Number. 2. Faraday's Law States that. Option A. the magnitude of the EMF is indirectly proportional to the rate of change of flux. Option B. the magnitude of the EMF is directly proportional to the magnetic flux. Option C. the magnitude of the EMF is directly proportional to the rate of change of flux. Correct Answer is. the magnitude of the EMF is directly proportional to the rate of change of flux. Explanation. NIL .................................. Question Number. 3. Which of the following is 1 Amp?. Option A. 1000 mA. ... Option B. 1000 kA. Option C. 1000 μA. Correct Answer is. 1000 mA. Explanation. NIL .
Read more

EASA MODULE 13 AIRCRAFT STRUCTURES AND SYSTEMS

                EASA MODULE 13 AIRCRAFT STRUCTURES AND SYSTEMS SUB-MODULE 01 THEORY OF FLIGHT  SUB-MODULE 03 AUTOFLIGHT                                                                            (ATA 22)  SUB-MODULE 04 COMMUNICATION / NAVIGATION                                       (ATA 23/34) SUB-MODULE 05 ELECTRICAL POWER                                                             (ATA 24) SUB-MODULE 06 EQUIPMENT AND FURNISHINGS                                        (ATA 25) SUB-MODULE 07 FLIGHT CONTROLS                                                                (ATA 27) SUB-MODULE 08 INSTRUMENTS                                                                        (ATA 31) SUB-MODULE 09 LIGHTS                                                                                      (ATA 33) SUB-MODULE 10 ON BOARD MAINTENANCE SYSTEMS                              (ATA 45) SUB-MODULE 11 AIR CONDITIONING AND CABIN PRESSURISATION       (ATA 21) SUB-MODULE 12 FIRE PROTECTION           
Read more