EASA MODULE 13 AIRCRAFT STRUCTURES AND SYSTEMS

               
EASA MODULE 13 AIRCRAFT STRUCTURES AND SYSTEMS

SUB-MODULE 01 THEORY OF FLIGHT 
SUB-MODULE 03 AUTOFLIGHT                                                                            (ATA 22) 
SUB-MODULE 04 COMMUNICATION / NAVIGATION                                       (ATA 23/34)
SUB-MODULE 05 ELECTRICAL POWER                                                             (ATA 24)
SUB-MODULE 06 EQUIPMENT AND FURNISHINGS                                        (ATA 25)
SUB-MODULE 07 FLIGHT CONTROLS                                                                (ATA 27)
SUB-MODULE 08 INSTRUMENTS                                                                        (ATA 31)
SUB-MODULE 09 LIGHTS                                                                                      (ATA 33)
SUB-MODULE 10 ON BOARD MAINTENANCE SYSTEMS                              (ATA 45)
SUB-MODULE 11 AIR CONDITIONING AND CABIN PRESSURISATION       (ATA 21)
SUB-MODULE 12 FIRE PROTECTION                                                                  (ATA 26)
SUB-MODULE 13 FUEL SYSTEMS                                                                       (ATA 28)
SUB-MODULE 14 HYDRAULIC POWER                                                              (ATA 29)
SUB-MODULE 15 ICE AND RAIN PROTECTION                                                (ATA 30)
SUB-MODULE 16 LANDING GEAR                                                                      (ATA 32)
SUB-MODULE 17 OXYGEN                                                                                   (ATA 35)
SUB-MODULE 18 PNEUMATIC/VACUUM                                                           (ATA 36)
SUB-MODULE 19 WATER/WASTE                                                                        (ATA 38)
SUB-MODULE 20 INTEGRATED MODULAR AVIONICS                                  (ATA 42)
SUB-MODULE 21 CABIN SYSTEMS                                                                    (ATA 44)
SUB-MODULE 22 INFORMATION SYSTEMS                                                     (ATA 46)

Comments

Post a Comment

Popular posts from this blog

What is AC Generator? Modern AC sources are, almost exclusively, induction generators, where the principle of work is based on electromagnetic induction. In this case, the electromagnetic current is obtained by rotating the conductors in the magnetic field. Today, almost all alternating current generators are three-phase. This means that in their movable part, which is called a rotor, they have three separate coils, placed between each other at an angle of 120◦, in which three EMC are phase-shifted precisely by 120◦, or in time sequence for a third period. Coils are usually indicated by the letters R, S and T, each of which defines a single phase. Depending on the binding of these coils, the transmission of electricity from the generator to the consumer is carried out with 4 or with 3 conductors. If at the beginnings of all the coils are bound at one point (the so-called zero point), then we are talking about star connection. In that case, the other ends of each coil, are connected wit...
Read more

MODULE 3 CHAPTERR 3 QUIZ 1

03. Electrical Terminology .................................. Question Number. 1. If a photon radiating into an electronic device causes the production of an electron/hole pair, the device is known as a. Option A. light emitting diode. Option B. laser diode. Option C. photodiode. Correct Answer is. photodiode. Explanation. NIL .................................. Question Number. 2. Faraday's Law States that. Option A. the magnitude of the EMF is indirectly proportional to the rate of change of flux. Option B. the magnitude of the EMF is directly proportional to the magnetic flux. Option C. the magnitude of the EMF is directly proportional to the rate of change of flux. Correct Answer is. the magnitude of the EMF is directly proportional to the rate of change of flux. Explanation. NIL .................................. Question Number. 3. Which of the following is 1 Amp?. Option A. 1000 mA. ... Option B. 1000 kA. Option C. 1000 μA. Correct Answer is. 1000 mA. Explanation. NIL ....
Read more
What is DC Generator? Contemporary developments are aiming towards eliminating direct current machines such as the DC generator, but they are still extensively used when a very smooth voltage is required, which cannot be achieved by a synchronous alternator with a diode or a network adapter. The basic parts are stator and rotor. The stator is usually made of permanent magnet, while the rotor from soft iron with copper conductors through which the current flows. The current is fed to the rotor via brushes that come across segments of copper. In order to rotate the rotor continuously and not to make a short circuit when the  brush touches two adjacent segments, the rotor must have at least three segments, while usually there are more than 10. The DC current of the stator winding creates a permanent magnetic field. Rotor rotates in this magnetic field and due to dynamic induction, it produces an EMC. All electromotive forces under one pole are in the same direction, and under another ...
Read more